Professional Tripods - Lever Lock
MTL series This lever lock professional tripod series include MTL 92/82 classic series and MTL 93/83 3-way series. They features flip lever leg lock, just lift lever to unlock, push lever to lock. It lets you extend or shorten a leg without taking your eyes off your subject. All series features quick release for 3 leg spread angles which allows setting each leg at different positions individually. The MTL 93/83 3-way series features multi-function center column allows for 180 degree vertical movement and 360 degree horizontal rotation as a lateral arm.
Bubble level & camera screw
With bubble level to adjust horizontal position quickly and asily. With dual camera screws for 1/4 and 3/8.
Releaseor locking levers
To change the leg position, just pull out and push back the quick release lever.
3 positions
Pull the quick release lock to change leg spread angles allows setting each leg at different positions.
Quick Lever Lock (patented)
This series features quick flip lever
leg lock, lift lever to unlock or push lever to lock, it's easy even when wearing gloves.
Multi-position center column
The center column can be used up side down, reversed, or as a lateral arm for nature and micro hotography. It allows 360o horizontal and 180o vertical adjustment. The column can be positioned and set quickly with the locking knob.
Built-in universal 3-way head
You can mount the camera directly with no need for an extra head for the lowest shooting position when using the built-in universal 3-way head, just separate the center column from the platform and lock the safety knob. It provide 360o horizontal and 180o vertical adjustment, quickly and easily.
Safety locking knob
Remove the center column from platform by looseningg the setscrew to use the built-in universal 3-way head. To set up the platform, pull the knob out and rotate it till "LOCK" Is in the top position. To release the platform pullthe knob out and rotate it till "FREE" is in the top position.
Change the stud camera screw
To change the stud camera screw (1/4" or 3/8"), you can unscrew the fixed screw by Allen wrench then turning platform anticlockwise.
3-way Head Function with in Lowest Position
Universal 3-way head function with short column (attached) when in the lowest position, ideal for macro or ecological shooting.
Tighten camera screw
Turning the platform anticlockwise to loosen or clockwise to tighten it for changing camera screw.
Specifications
- Leg Dia: 25mm
- Section: 3
- Folded: 63cm
- Min. H.: 26cm
- Max. H.: 137cm
- Extended H.: 160cm
- Max. Load: 5kg
- Weight: 1.54kg
This product was added to our catalog on Wednesday 22 April, 2009.
